SAGE UCTT 8901 Technical Data
Powerful Next Generation Base Station Tester
SPECTRUM ANALYZER
• Range: 698 MHz to 2.7 GHz
• Trace Update Time: Min 50 ms, Max 150 ms
• Frequency Span: 10 KHz to 600 MHz
• Resolution Bandwidth: 100 Hz to 5 MHz
• Sweep Trigger: Free run, Single, External
• Sample Averaging: 1 to 100
• Windowing: Uniform, Kaiser, Hanning, Hamming, Gaus
• Reference Level Range: -100 dBm to +60 dBm (Ref Level = 0 dB)
• Measurement Range: -144 dBm to + 30 dBm
• Input Attenuation: 0 to 55 dB automatically selected
• Preamp: +20 dB (Manual)
• Absolute Amplitude Accuracy: +/- 1 dB
• DANL – 143 dBm 698 to 1 GHz
• DANL – 143 dBm 1.1 to 2.2 GHz
• DANL – 141 dBm 2.2 to 2.7 GHz
• Simultaneous Dynamic Range: 90 dB
• SSB Phase Noise: -90 dBc/Hz max at 30 kHz offset
• Spurious Responses: Residual (input terminated in 50 ohms):
< -130 dBmSignal Related (2-tones, -26 dBm, 100 kHz spacing
(Preamp OFF): > 70 dBc
• Displayed Average Noise Level: -144 dBm (DANL in 100 Hz
RBW, preamp on)
• RF Input VSWR: 1.8:1 typical
• Display Range: -200 dBm to + 60 dBm 1 to 15 dB/div in 1 dB
steps. Ten divisions displayed
CABLE AND ANTENNA ANALYZER
• Frequency Range: 698 MHz to 2.7 GHz
• Frequency Resolution: 125 kHz
• Data Points: 1024
• Interference Immunity: On-Channel: +20 dBm On-Frequency:
0 dBm (RF Out) +30 dBc RF in
• Insertion Loss: Range: > 100 dB Accuracy: +/- 1 dB
• Distance-to-Fault: Range:
200 M Data Points: 1024 Accuracy:Typical +/- 15 cm
Measurement Speed: 200 ms
• Return Loss: Range: 0 to 100 dB Resolution: 0.01 dB
• VSWR: Range: 1 to 3.5 Resolution: 0.01 dB
POWER METER
• Frequency Range: 698 MHz to 2.7 GHz
• Display Range: -80 dBm to +80 dBm
• Measurement Range: -60 dBm to +30 dBm Offset Range: 0 to
+60 dB
• Accuracy: +/- 1 dB
• VSWR: < 1.8:1 typical
• Maximum Power: +30 dBm (1W) without external attenuator
 INTERFERENCE ANALYZER
• Strength of the Interferer: Locate the Interferer
• RSSI: Collect data up to 100 hours
• Spectrogram: Collect data upto 100 hours
CHANNEL SCANNER/ADJACENT CHANNEL POWER
• Frequency Range: 698 MHz to 2.7 GHz
• Measurement Range: +30 dBm to -144 dBm
• Channel Power Accuracy: ±1.0 dB
• Adjacent Channel Power Accuracy: ±0.50 • Occupied Bandwidth Accuracy: ±100 kHz
• Residual Adjacent Channel
• Leakage Ratio (ACLR)
-55 dB typical at 5 MHz offset
-60 dB typical at 10 MHz offset
• Leakage Ratio (ACLR):
-55 dB typical at 5 MHz offset
-60 dB typical at 10 MHz offset
• ACLR Accuracy (Single Channel Active):
-45 dB at 5 MHz offset
±0.5 dB for ACLR -50 dB at 10 MHz offset
• Frequency Error: ±1 Hz + Time Base Error
GSM/GPRS/EDGE RF MEASUREMENTS GSMK Modulation Quality
• RMS Phase Measurement Accuracy: ±1 deg
• Peak Phase Measurement Accuracy: ±1 deg
• Residual Error (GSMK): 1 deg
• Frequency Offset Accuracy: ±1 Hz
• TSC: 0-7
• SBC: 0-2
• Burst Type Capture: Frequency Correction, Dummy, Normal, Synchronization, Access 8PSK Modulation Quality
• (EVM) Measurement Accuracy: ±1.5%
• Residual Error (8PSK): 2.5%
• Frequency Offset Accuracy: ±1 Hz
GSM/EDGE MODULATION ANALYZER
• IQ Diagram
• Burst Type Decode
• Frame Number Decode
• BSIC Number Decode
GSM/EDGE BURST ANALYZER
TimeSlot Mask per 3GPP-TS-05.05
GSM/EDGE RF MASK ANALYZER
Support for all Mask Templates per Annex B
• Reference Power Level: -90 dBm to +58 dBm
GSM ABIS MONITOR
• Codec Type: GSM, AMR, ACELP
• TRAU FRAME Decode
• LAPD Decode
WCDMA/HSDPA RF MEASUREMENTS

• Frequency Ranges: 698 MHz to 2.7 GHz
• RF Channel Power: ±0.5 dB typical
• Occupied Bandwidth Accuracy: ±100 kHz
• Transmit Level: 0 dB, -7.5 dB, and -15 dB
• Clock Sources: External Bits clock
• Internal: 1.544 Mb/s ±5 ppm / 2.048 Mb/s / ±5 ppm
• Pulse Shapes: Conform to ANSI T1.403 and ITU G.703
• Pattern Generation and Detection:
• PRBS: 2-9, 2-11, 2-15, 2-20, 2-23 Inverted and non-inverted QRSS, 1-in-8 (1-in-7), 2-in-8, 3-in-24, All ones, All zeros, T1-Daly, User defined (128 bits)
• Circuit Status Reports: Carrier present, Frame ID and Sync., Pattern ID and Sync.
• Alarm Detection: AIS, RAI
• Error Detection: Frame Bits, Bit, BER, BPV, CRC, Error Sec
• Error Insertion: Bit, BPV, Framing Bits, RAI, AIS
• Loopback Modes: Self loop, CSU, NIU, User defined, In-band or Data Link
• Level Measurements: Vp-p (±5%), can also display in dBdsx
• Data Log: Continuous, up to 48 hrs
• T1 Frequency Measurement: ±5 ppm
• DS0 Channel Access Testing: Tone Generator Frequency: 100 Hz to 3000 Hz
• Level: -30 to 0 dBm, with 1 dB steps
• VF Measurement: Frequency: 100 Hz to 3000 Hz, ±1 Hz Level: -40.0 to +3.0 dBm, ±0.2 dBm
• Audio Monitor: Manually select channel 1 to 24
• ITU G.826 Analysis & G.821 Error Reporting: Errored seconds, error free seconds, severely
errored seconds, unavailable seconds, available seconds, degraded minutes

For Sales Information Call...
831- 761-1000...Press 2.
E-mail: sales@sageinst.com                      

Rugged Water Resistant
per MIL-STD-810
Super Bright 10.4" SVGA
with Touch Screen
Loaded 5.4 kg/12 lb

WCDMA DEMODULATION AND WCDMA/HSDPA

Demodulator
• EVM Accuracy: (3GPP Test Model 4) ±2.5%; EVM 25% (3GPP Test Model 5) ±2.5%; EVM 20%
• EVM Accuracy2: ±2.5% for 6 EVM 20%
• Residual EVM: 2.5% typical
• Code Domain Power: ±0.5 dB for code channel power >-25 dB, 16, 32, 64 DCPH (test model 1) 16, 32 DCPH (test model 2, 3)
• CPICH (dBm) Accuracy: ±0.5 dB typical
• Scrambling Code: 3 seconds T1/E1 Analyzer, Fractional T1/E1 and
Sub-channels
• Line Coding: AMI, B8ZS
• Framing Modes: D4 (Superframe), ESF (Extended Superframe)
• Connection Configurations: Terminate (100 O) Bridge (100K O) Monitor (100 O) Drop&Insert (100 O)
• Receiver Sensitivity: Terminate +6 dB to -36 dB Bridge +6 dB to -36 dB Monitor 20 dB flat gain Drop&Insert +6 dB to -36 dB

ETHERNET ANALYZER
• Physical Layer 10/100/1000 Base T
• RFC 2544 Testing (Throughput, Latency & Packet Loss Rate)
Cable Testing (TDR)

ARBITRARY RF SIGNAL GENERATOR
• Frequency Range: 698 MHz to 2.7 GHz
• Power Output: 0 dBm, ± 5%
• Phase Noise: 85 dBc
• Waveforms: AMPS, TDMA, GSM, CDMA, WDCMA

GENERAL SPECIFICATIONS
• Uplink/Downlink Channel Plans:
AMPS, 850CDMA, 1900CDMA, GSM850, GSM900, GSM1800, GSM1900, UMTS1700, UMT2100
• Maximum Continuous Input: +30 dBm
• Maximum Continuous Input without Damage: +33 dBm
• Turning Resolution: 1 Hz
• Frequency Accuracy: Internal Time Base Accuracy: ±0.1 ppm after warm up. Internal Time Base Aging: ±0.1 ppm/year GPS Lock: +/-
12.5 ppb (25° C)
• Frequency and Time Reference: Internal: Ovenized Crystal Reference, GPS derived 1 pps External: One Pulse Per Second, Even Second Clock Multiples of 1 MHz to 20 MHz
Multiples of 1.2288 MHz to 19.6608 MHz 2.048 MHz

Interfaces
RF Out Port: Type-N F (50O)
RF In Port: Type-N F (50O)
Ext Ref/Trig: BNC
Even Sec: BNC
GPS Antenna: SMB
Dual E1/T1: RJ-45
Dual 10/100/1000: RJ-45
10/100 Base T Ethernet: RJ-45
Ext DC Input: MIL-57D Circular
SVGA: MIL-STD Circular (Acc)
Audio: MIL-STD Circular (Acc)
USB Slave: Type-A
USB Host: Type-B
• Environmental: MIL-STD-810-F
Operating: -10-C to 55-C, humidity 85%
Storage: -51-C to 71° C
Altitude: 5000
• Safety: EN 61010-1, portable equipment
• Electromagnetic Compatibility: CE
• Size: 300 x 216 x 114 mm (13.0 x 8.5 x 4.5 in.)
• Weight: 5.4 kg/12.0 lbs (loaded – one bat.) 6.1 kg/13.5 lbs (loaded – two bat.)

Privacy | Contact Information | Press Room | Search | Site Map | Call...831-761-1000 | © 2007, SAGE Instruments, Inc.